Pump Home Page | Water Pumps | Sump & Sewage Pumps | Accessories | Warranty Information


RJSE Jet Sprinkler Utility Pump
Applications
Ideal for both residential and commercial lawn and turf sprinkling systems.
Features
• 1/2 HP, 115 volt motor with 8 foot power cord.
• Includes garden hose adaptor.
• Rugged cast iron casing.
• High efficiency thermoplastic impeller.
• CSA approved.
• 1 Year over-the-counter warranty.

RLSP Lawn and Turf Irrigation Pump
Applications
Ideal for pressure boosting, sprinkler systems and general purpose applications.
Features
• Rugged cast iron casing.
• Suction check valve.
• High efficiency thermoplastic impeller.
• 2" Suction and 1 1/2" discharge.
• Self priming to 25 feet.
• Maximum pressures to 59 PSI.
• Flow rates to 124 U.S. GPM.
• CSA approved.
• 1 Year over-the-counter warranty.

RLHE Lawn and Turf Irrigation Pump
Applications
Ideal for pressure boosting, sprinkler systems and general purpose applications.
Features
• Rugged cast iron casing.
• Suction check valve.
• High efficiency thermoplastic impeller.
• 1 1/2" Suction and discharge. 2” Suction and discharge on RLHE-300.
• Self priming to 25 feet.
• Maximum pressures to 59 PSI.
• Flow rates to 124 U.S. GPM.
• CSA approved.
• 1 Year over-the-counter warranty.

RLCGF Centrifugal Pressure Pump
Applications
Ideal for a wide variety of pressure boosting, liquid agricultural chemical sprayer and lawn & turf irrigation applications.
Features
• Heavy duty cast iron pump casing.
• Durable cast iron enclosed type impeller.
• Stainless steel shaft sleeve and Viton seal.
• Briggs & Stratton engines; 3.5 HP (Standard) or 5.5 HP (INTEK) .
• Pressures to 71 PSI max.
• Flow rates to 136 U.S. gallons per minute.
• 1 Year over-the-counter warranty.

RLGF Multi-Purpose Utility Pump
Applications
Ideal for liquid transfer including most agricultural chemicals and general dewatering where rugged portability is important. The 5.5 HP is for high specific gravity fluids.
Features
• Heavy duty cast iron pump casing.
• Durable cast iron semi open type impeller.
• Stainless steel shaft sleeve and Viton seal.
• 2" Suction & discharge for convenient hookup.
• Briggs & Stratton engines; 3.5 HP (standard)or 5.5 HP (INTEK) .
• Self priming to 25 feet lift.
• Flow rates to 170 U.S. gallons per minute.
• Handles most liquid agricultural chemicals.
• 1 Year over-the-counter warranty.

RL-50 Self Priming Utility Pump
Applications
Ideal for pumping out flooded basements, livestock watering, flood irrigation, and general dewatering.

Features
• 1/2 HP, 115 volt motor with 8 foot power cord.
• Rugged cast iron pump casing.
• Cast iron impeller.

• Self priming to 25 feet.

• 1 1/4" Suction & discharge, with hose adaptor.
• CSA approved.
• 1 Year over-the-counter warranty.


RL-V11 Rotary Hand Pump
Applications
Ideal for the transfer of a wide variety of petroleum based fluids and fuels from drum style containers which have a 2 inch bung adaptor.
Features
• Pumps gasoline, diesel fuel, lubricating oils, and other petro-chemical based fluids.
• Rugged cast iron construction.
• Non-sparking solid brass vanes.
• 3/4 inch NPT male thread discharge spout.
• 40 inch telescoping suction pipe.
• 1 U.S. gallon per 10 revolutions.
• 1 Year over-the-counter warranty.

RL-#3 Pitcher Type Hand Pump
Applications
Ideal for the supply of fresh water to rural homes, farms and cabins that have suction lifts down to 20 feet, and where electrical power may not be available.
Features
• Rugged cast iron pump body and handle.
• Primes down to 20 foot suction lift.
• Compact design allows convenient installation.
• 3" Diameter cylinder pulls more water per stroke.
• Cylinder is tapped for 1 1/4" NPT suction pipe.
• 1 Year over-the-counter warranty.

2RLAG-1 2.4HP 1.5" Portable
Applications
Ideal for a wide variety of pressure boosting, liquid and lawn & turf irrigation applications.
Features
• Lightweight aluminum construction with base and handle for portability
• 1.5” NPT male inlet and outlet
• Includes adaptors to convert to 1 in
• Powered by a 2.4 hp 4 stroke air cooled OHV engine
• Delivers 3960 U.S. Gallons Per Hour (14,990 LPH)
• 1 Year over-the-counter warranty

5RLAG-2 5 HP 2" Water Pump - Flood Pump
Applications
Ideal for a wide variety of pressure boosting, liquid and lawn & turf irrigation applications.
Features
• Lightweight aluminum outer casing
• Durable cast iron inner volute and impeller
• 2” NPT male inlet and outlet
• Powered by a 5.5 hp 4 stroke air cooled OHV engine
• Delivers 9480 U.S. Gallons Per Hour (35,886 LPH)
• Includes heavy duty roll frame
• 1 Year over-the-counter warranty

6RLAG-2ST 6 HP 2" Semi Trash
Applications
Ideal for a wide variety of pressure boosting, liquid agricultural chemical sprayer and lawn & turf irrigation applications.
Features
• Rugged cast iron pump body and handle.
• Primes down to 20 foot suction lift.
• Compact design allows convenient installation.
• 3" Diameter cylinder pulls more water per stroke.
• Cylinder is tapped for 1 1/4" NPT suction pipe.
• 1 Year over-the-counter warranty.

4RLAG-2H 4 HP 2" Water - Honda
Applications
Ideal for a wide variety of pressure boosting and lawn & turf irrigation applications.
Features
• Lightweight aluminum outer casing
• Durable cast iron inner volute and impeller
• 2” NPT male inlet and outlet
• Powered by a Honda GX120 4.0 hp 4 stroke commercial engine with low oil shutdown
• Delivers 9840 U.S. Gallons Per Hour (35,886 LPH)
• Includes heavy duty roll frame
• 1 Year over-the-counter warranty

6RLAG-3ST 6 HP 3" Aluminum Semi Trash
Applications
Ideal for a wide variety of pressure boosting, liquid agricultural chemical sprayer and lawn & turf irrigation applications.
Features
• Lightweight aluminum outer casing
• Durable cast iron inner volute and impeller
• 3” NPT male inlet and outlet
• Powered by a 6.0 hp 4 stroke air cooled OHV engine
• Silicon carbide seals for abrasion resistance and semi-trash application
• Delivers 15840 U.S. Gallons Per Hour (59,961 LPH)
• Includes heavy duty roll frame
• 1 Year over-the-counter warranty

5RLGF-8 5.5 HP 2" Discharge Cast Iron Pump - Briggs
Applications
Ideal for a wide variety of pressure boosting, liquid agricultural chemical sprayer and lawn & turf irrigation applications.
Features
• Lightweight aluminum outer casing
• Durable cast iron inner volute and impeller
• 3” NPT male inlet and outlet
• Powered by a Briggs & Stratton Intek, Air Cooled, 4 Stroke, 205cc OHV engine
• Silicon carbide seals for abrasion resistance and semi-trash application
• Delivers 9,000 U.S. Gallons Per Hour (34,069 LPH)
• Carry handle and base
• 1 Year over-the-counter warranty

6RLAG-3TT 6HP 3" Trash Pump Aluminum
Applications
Ideal for a wide variety of pressure boosting, liquid agricultural chemical sprayer and lawn & turf irrigation applications.
Features
• Removable aluminum outer casing
• Durable cast iron inner volute and impeller
• 3” NPT male inlet and outlet
• Powered by a 6.0 hp 4 stroke air cooled OHV engine
• Silicon carbide seals for abrasion resistance and semi-trash application
• Delivers 20.580 U.S. Gallons Per Hour (77,904 LPH)
• handles 1 ¼” solids
• Includes heavy duty roll frame
• 1 Year over-the-counter warranty


   
 
View Red Lion's Privacy Policy
Adobe Flash Plugin required to view some features.
Download Acrobat Reader to view PDF files.